SOME IMAGE
Das TCKT forscht nicht nur, sondern wir publizieren auch unsere Ergebnisse aus den verschiedenen Projekten – natürlich immer nur in Abstimmung mit und nach Freigabe durch die Partner. Finden Sie hier eine Auswahl unserer Publikationen.

Publikationen

  • N. Moser, C. Strasser, A. Tanda, V.-M. Archodoulaki, C. Burgstaller; Influence of printing direction and filler orientation on the thermal conductivity of 3D printed heat sinks; Polymer Engineering and Science
  • C. Burgstaller, K. Renner; Recycling of Wood–Plastic Composites—A Reprocessing Study; Macromol 2023, 3, 754-765
  • C. Burgstaller; Applying reactive extrusion to modify polymers for improved compatibility; PM15; Bratislava; 2023
  • B. Liedl, C. Burgstaller; Characterisation of recovered PET from mixed textile production waste and post-consumer waste-textiles; PM15; Bratislava; 2023
  • C. Strasser, C. Burgstaller; 3D printing on unidirectional PA6 tapes and their effect on the mechanical properties; PM15; Bratislava; 2023
  • B. Purgleitner, B. Liedl, P. Pangerl, R. Gradinger, C. Burgstaller; Recycling of multilayer-film components by cryogenic separation; PM15; Bratislava; 2023
  • T. Höftberger, B. Liedl, C. Burgstaller; The influence of multiple recycling rounds on the mechanical properties, the melt-flow-rate, of PP-cellulose short fibre compounds; PM15; Bratislava; 2023
  • D. Ostner, C. Burgstaller, M. W. Hlawitschka; Application of DSC and ATR-IR to the textile waste stream as an input for PET recycling; PM15; Bratislava; 2023
  • N. Moser, C. Strasser, A. Tanda, V.-M. Archodoulaki, C. Burgstaller; Influence of orientation of the filler on the thermal conductivity of injection molded polymer heat sinks compared to 3D printed heat sinks; PM15; Bratislava; 2023
  • H.Stadler,T.Höftberger,C.Burgstaller,W.Stadlbauer; Influence of Impregnation Die Setup on the Properties of Unidirectional Thermoplastic Tapes; ICCM 23; Belfast; 2023
  • P. Walzel, C. Burgstaller; Hochwertiges Recycling von medizinischem Verpackungsmaterial; MedTechCirlce, 20.06.2023; Linz
  • C. Burgstaller, K. Renner; Feasibility of Cherry Pit Particles as a Natural Reinforcement in Polypropylene; Macromol 2023, 3, 303–313
  • B. Purgleitner, T. Heidlmayr, C. Burgstaller; Weld line studies on polyolefins and post-consumer recyclates; PPS 38; St. Gallen; 2023
  • D. Ostner, C. Burgstaller; Investigation of enzymatic hydrolysis vonditions on PET properties; PPS 38; St. Gallen; 2023
  • B. Liedl, T. Höftberger, C. Burgstaller; The influence of multiple mechanical recycling on the properties of glass fiber reinforced composites made from organosheets; PPS 38; St. Gallen; 2023
  • T. Höftberger, C. Burgstaller; Influence of the fiber content of different fiber types on the mechanical properties and the printing accuracy for FFF-3D printing; PPS 38; St. Gallen; 2023
  • C. Strasser, C. Burgstaller; Influence of process parameters on the porosity of 3D printed components by fused filament fabrication; PPS 38; St. Gallen; 2023
  • N.Wolfsgruber, C. Strasser, A.Tanda, V.-M. Archodoulaki, C. Burgstaller; Influence of printing direction on the thermal conductivity of 3D printed polymer heat sinks; PPS 38, St. Gallen, 2023
  • B. Purgleitner, P. Pangerl, R. Gradinger, C. Burgstaller; Sortenreines Separieren von Mehrschichtfolien durch kryogenes Trennen; Fachtagung Kreislaufwirtschaft
  • B. Purgleitner, D. Viljoen, I. Kühnert, C. Burgstaller; Influence of injection molding parameters, melt flow rate and reinforcing material on the weld-line characteristics of polypropylene; Polymer Engineering and Science 
  • N.Wolfsgruber, A.Tanda, V.-M. Archodoulaki, C. Burgstaller; Influence of filler type and content on thermal conductivity and mechanical properties of thermoplastic compounds; Polymer Engineering and Science